Coating

Diamon-Fusion®
DIAMON-FUSION® is an award-winning innovative technology that protects any silica- based surface such as glass, ceramic tile, porcelain and granite. DIAMON-FUSION® was developed to substantially reduce the time and effort needed to maintain such surfaces.

DIAMON-FUSION® is similar to the development of Teflon®* for cooking pans. While you can cook food in uncoated pans, it is so much easier to clean if you cook with Teflon®* coated pans. If you burn certain foods in pans without non-stick coatings, it often means that you must throw the pan away. Those same foods when cooked in a coated pan, clean up rather easily. The same is true with DIAMON-FUSION® on glass or other silica-based surfaces. While you still must maintain your DIAMON-FUSION® coated surface, the time and effort required are significantly reduced. The warmer and dirtier the water, the greater the surface tension and spotting, thus shower doors require more maintenance than other applications. What’s special about treated surfaces is that those spots, if removed every few days, will not stick and can be easily removed with a damp washcloth. (You wouldn’t put away your Teflon®* coated pan right after you cooked in it unless you gave it a quick rinse and dry. We suggest, every few days you use a body Loofah glove or a regular body scrubber (sponge). If you do notice a slight build up of grime, simply apply a little soap to the glove or body scrubber and gently wipe over the area, then rinse off with cold water. Simple as that! And all of this can be done while you are having your shower, saving you even more time.

DIAMON-FUSION® eliminates the need of any HARSH, EXPENSIVE and TOXIC CHEMICAL SHOWER SPRAYS.

Of the thousands of DIAMON-FUSION® applications, only a handful of people have been dissatisfied with their treatments and in almost all of those cases, the customer was unhappy because they thought that there was no maintenance at all required on treated surfaces. While DIAMON-FUSION® does make treated surfaces water repellent, stain resistant, harder to scratch and harder to break and lasts for a long period of time, maintenance time is guaranteed to be reduced, depending on the application, by as much as 50% and up to 90%.

Diamon-Fusion® Stain Remover/Maintenance Powder

Available exclusively to DFI licensees.

With light pressure, it takes out “etched in” water spots and mineral deposits such as lime scale, calcium, oxidation, iron, alkali, mildew, mold, soap scum, paint and salt spray.

Safe on hands: NO chlorides, bleaches or chlorine that may damage your skin.

With heavy scrubbing and hard pressure it may also remove stubborn stains. Diamon-Fusion® Stain Remover/Maintenance Powder is NOT recommended on highly polished or lacquered surfaces or any areas that have been Diamon-fused since it may also take off the finish. Only use on surfaces not harmed by mild abrasives.

* Teflon® is a registered trademark of E.I. DuPont de Nemours and Company